About the Exchange

Choice. Telx customers have lots of it. By deploying in a Telx facility, customers are one connection away from hundreds of major telecom and data networks.

For years Telx has brought the internet "inside" its core facilities by giving customers the option to cross connect to many active IP networks operated by other providers in our centers. We will continue to support access to these networks as they are instrumental to our customers' growth. But now Telx provides even more choice to its customers looking for more high quality IP network peering points with our Telx Internet Exchange (TIE) service in Atlanta, Dallas, New York and Phoenix.

The Telx Internet Exchange is a neutral, privately owned and managed packet and Internet exchange, providing a high performance Internet peering fabric for participants. It allows customers to reduce operating costs by aggregating ISPs, content providers, enterprises and others on a single highly available service platform so that Internet traffic may have direct access to destination networks. The Exchange is designed to eliminate the middleman or transit provider which in turn leads to higher profits to you. TIE participants can route IP traffic efficiently providing faster, more reliable and lower-latency internet or VoIP access to their customers. We are able to help your Internet-connected business reduce operational costs, improve network performance, and add another layer of network resilience. In addition, Telx offers members not only a world class exchange platform, but also a forum to discuss new ideas and planning for a better Internet.

TIE includes access to a centralized Ethernet switching fabric and the necessary supporting infrastructure to enable companies to connect and peer at speeds ranging from 1 Gbps (Gigabit Ethernet) to multiples of 10 Gbps and even 100 Gbps in our Atlanta and New York locations. For convenience, standard reporting tools allow TIE members to monitor performance and traffic metrics.

Benefits

Benefits
  • Extremely cost-effective compared with IP Transit.
  • Better performance reliability and reduced latency.
  • Admittance to Telx's repository of peering contacts and policies by company.
  • Assistance from the Telx peering community on establishing peering.
  • Disaster recovery for your connections at other exchange locations.

Requirements

Requirements
  • A router with access into a Telx Internet Exchange enabled data center.
  • All participants must have an Autonomous System Number ("ASN").
  • All participants must follow Telx's Acceptable Use Policy (AUP).

Support

Support

The switch fabric is managed with 24/7 on-site expertise accessible by phone at 1.888.TELXTECH (1.888.835.9832) or by accessing the Telx MarketplacePORTAL to open a trouble ticket.

For access click here or, if you do not yet have an account on the Marketplace, contact your company's administrator.

Become a Participant

Connections to a TIE switch may be 1Gbps, 10 Gbps or 100 Gbps Ethernet via single-mode fiber.

To join please complete connection request.

Router Viewer Once you are connected to the Exchange you must peer with our Route Viewer ("RV"). The RV will never advertise any routes to you so you might want to filter all incoming advertisements from the RV. We ask that you send your "standard" peering routes to the RV. The data collected by the RV is used for monitoring and support purposes. The RV uses the ASN 65535 and are always the ".1" IP on TIE (e.g. Atlanta is 198.32.132.1). To become listed as an active participant, you will be required to peer with the Route Viewer.

Router Servers You can peer with the TIE Route Servers to automatically peer with many participants. Peering with the route server enables you to set up peering sessions more efficiently by facilitating the implementation of peering arrangements lowering the barrier of entry for new members. This helps get you peering quickly by establishing one peering session with the route server and thereby peering automatically with anyone else peering on the server.

PeeringDB We strongly recommend that participants join, the PeeringDB. The PeeringBD is a database of networks that are interested in peering. It helps answer the question, "Who can I peer with and where?". The PeeringDB provides a web interface where users can search and find information on different exchanges and who peers on the exchanges and what the peering policies are for the participant. By joining the PeerinDB, your peering information is available to the global peering community; helping ensure that others will be more likely to peer with you.

Once you are connected you will probably want to contact the current participants about peering.

If you have any questions let us know at tie@telx.com.

Participants

Telx maintains a public list of participants on each of our Exchanges. This data is updated in real-time.

View More

Telx maintains a public list of participants on each of our Exchanges. This data is updated in real-time.

 

Telx maintains a public list of participants on each of our Exchanges. This data is updated in real-time.

 

Telx maintains a public list of participants on each of our Exchanges. This data is updated in real-time.

 

Telx maintains a public list of participants on each of our Exchanges. This data is updated in real-time.

What can we help you with?

Select a topic above


General Topics

Q: What is an Internet Exchange Point?
A: An Internet Exchange Point or "IXP" is a physical platform that allows different Internet connected networks to exchange Internet traffic between their autonomous systems by means of bi-lateral peering arrangements. IXP's reduce the reliance on traditional paid transit providers providing a settlement free method to exchange IP traffic directly over a managed platform. Furthermore, the increased number of paths learned through the IXP improves routing efficiency and fault-tolerance.

Q: What is The Telx Internet Exchange?
A: The TIE is an Internet Exchange point or "public peering point" that allows networks to exchange traffic through a common switch fabric. Peering is done on a settlement-free basis. By connecting to the TIE facilities members can peer with any other members connected to same the TIE fabric.

Q: Where are the Telx Internet Exchanges located?
A: The Telx Internet Exchange points are located in four regional areas New York/New Jersey Metro, Atlanta, Dallas Metro and Phoenix.

Q: What connection types and speeds are available?
A: Connections are via fiber cross connects. Available speeds are 1Gbps, Nx1Gbps (via single mode fiber), 10Gbps and Nx10Gbps (via single more fiber). 100Gbps port speeds are offered in our Atlanta and New York/New Jersey metro locations in addition to 1 and 10Gbps speeds.

Q: What are the membership requirements with TIE?
A: Each network must provide for the following:

  • Physical presence in a Telx facility
  • A border router to connect to the port on a TIE switch
  • An engineer or administrator who can configure the border router
  • An exchange point IP address for the border router (Telx provided)
  • An Autonomous System Number (ASN) to identify the network

Q: What is the Route Viewer
A: Telx maintains a route viewer at every TIE location. Once you are connected you must peer with our route viewer. The route viewer monitors your BGP session state. The route viewer does not advertise routes. Telx suggests filtering all incoming advertisements from the route viewer. We ask that you send your "standard" peering routes to the route viewer. Data collected by the RV is used for monitoring and support purposes. The RVs use the ASN 65535 and are always the ".1" IP on the TIE (both for IPv4 and IPv6).

Q: Does TIE have Route Servers?
A: Yes - Telx offers its participants the opportunity to peer via the TIE Route Servers. We operate two route servers on every Exchange. The route servers are based on the BIRD routing daemon. Both offer the peers the ability to filter based on their IRRdb entries. Every participant has the ability to filter out any number of peers.

Q: Do you have any customer usage graphs?
A: Customer usage graphs are available via the TIE Participant Portal

Q: Is there an AUP (Acceptable Use Policy)?
A: Please see the posted AUP.

Q: How do I contact TIE Network Operations?
A: Email tie@telx.com or the Telx Command Center at 1.888.835.9832.

Getting Started

Q: Who can I peer with?
A: Potentially, you can peer with any network that participates on the same TIE platform. You must contact each prospective network to verify that you meet its peering policies. You may peer with the TIE Route Servers to automatically peer with many participants. The TIE Portal may be used to identify and contact potential peers.

Q: How do I establish a bi-lateral peering session
A: Please see the Step By Step guide for instructions

Q: Where do I get an IP addresses?
A: Telx manages our own IPv4 and IPv6 address allocations. Addresses are assigned from the following blocks.

Telx Internet Exchange IP Addresses
City IPv4 Address IPv6 Address
Atlanta 198.32.132.0/24 2001:478:132::/64
Dallas 206.126.114.0/24 2001:504:17:114::/64
New York 206.126.115.0/24 2001:504:17:115::/64
Phoenix 198.32.186.0/24 2001:478:186::/64

Q: Do you support Gigabit Ethernet Port Link Aggregation?
A: Yes we do! Please check out Link Aggregation Guide.

Participant Portal Features

Q: Can I see Alert History?
A: Yes - alerts regarding outages and planned maintenance taking place on the platform are available to members. You can view the last seven days of alerts by logging into the TIE portal and navigating to the Alert section within the member only section of the participant portal.

Q: What can I do with Interface Management?
A: Interface Management - Allows you to view usage details, control your static MAC address, shutdown, bring up or bounce any of your interfaces.

Q: Is there a way for me to keep track of my peering relationships?
A: Yes – with Peering Manager you can track peering sessions and send e-mails to other peering coordinators to help speed-up communications with other participants.

Q: Can I manage email addresses via the Portal?
A: You can use the Manage Contact Preferences feature which allows you to manage which e-mail address you want other Participants to use to contact you.

Q: Do you provide a Looking Glass?
A: The portal Looking Glass tool allows you to view BGP announcements to our Route Viewers, and run traceroute and ping commands from the Route Viewers.

Q: Can I email other participant from the portal?
A: The Bulk Mail Manager, built right into the portal, allows you to send bulk emails to participants to announce a new presence, maintenance work or other important communications. You can also setup your account to receive e-mail notifications when any of your ports or BGP sessions change state (up/down).

Q: Do you provide sFlow/NetFlow data analytics?
A: Yes, we enable participants to see current traffic levels per ASN destination. Flow data is sampled and intended to provide general breakdown of destination traffic. Data is retained for seven days.

Acceptable Use Policy

Telx's goal is to make the Telx Internet Exchange (TIE) the best IP exchange for all participants. As part of this, we put together the following policy to help the exchange run well for all users.

General

Participants must ensure that their usage of the Telx Internet Exchange is not detrimental to the usage of other Telx Internet Exchange participants.

Participants must ensure that their usage is in compliance with applicable Internet standards and Internet exchange standards as published by the IETF.

Participants should not use the Telx Internet Exchange for carrying traffic between their own routers.

Traffic may only be forwarded from one Telx Internet Exchange participant to another if permission is given by the recipient. There is no Multilateral Peering (MLPA).

Connectivity

The Telx Internet Exchange provides connectivity to its infrastructure using switched, shared Ethernet LANs. All physical interfaces connected to the Telx Internet Exchange infrastructure must be explicitly configured with duplex and speed settings, and must not be configured to use Ethernet auto-negotiation.

Physical interfaces of the same speed on the same physical Telx Internet Exchange switch may be aggregated together using IEEE 802.3ad link aggregation control protocol, by prior agreement with the Telx Internet Exchange. However, for multiple connections, the Telx Internet Exchange and Telx reserve the right to charge fees as needed to ensure fair access to all participants.

The Telx Internet Exchange reserves the right to disconnect any port which violates any of the requirements listed without notice.

Routing Policy

Each Participant must have their own Autonomous System number.

Unicast peering between participants' routers across the Telx Internet Exchange will be via BGP (version 4 or subsequent) and peers must set NEXT_HOP_SELF if advertising routes from other participants.

Participants shall not generate unnecessary route flap, or advertise unnecessarily specific routes in peering sessions with participants across the Telx Internet Exchange.

Participants may not point default or otherwise use another participant's resources without permission.

Broadcast traffic may be not delivered to the exchange, except as needed for normal operation and troubleshooting.

Participants will peer with the Route Viewer or other collection devise (the viewer will not advertise any routes, and the routes received will only be used for data collection, reporting and monitoring).

Participants may only utilize a single layer-2 MAC address to place a single layer-3 router per port allocated from the switch fabric unless by prior agreement.

Physical

Participants have a duty of confidentiality to the Telx Internet Exchange and other Telx Internet Exchange participants. In particular, Participants must not install packet sniffers to monitor traffic passing through the Telx Internet Exchange.

Participants may not connect equipment to or otherwise provide connectivity to the Telx Internet Exchange switch infrastructure on behalf of non-participants.

Legal

Participants must not carry out any illegal activities thru the exchange. While Telx agrees to aggressively protect the privacy and operational integrity of our users, we are obligated under US law to comply with warrants and subpoenas as presented by qualified law enforcement agencies.

In the event a participant makes any claim against the Telx as a result of the Exchange, for any reason whatsoever, the claim or claims shall be limited in aggregate to the amount of fees paid by the participant to Telx for the IP Exchange service.

Please forward any questions or comments to tietelx.com.

Telx may amend this document at any time. If any participating network has a grievance or concern with the conduct of any other participating network, send an email to tietelx.com for review.

Participants agree to comply with this AUP and have 30 days to comply with any changes.

Atlanta, GA: 56 Marietta St. ● Dallas, TX: 2323 Bryan St. and 8435 N. Stemmons Fwy ● New York, NY: 60 Hudson Streeet, 111 Eighth Ave and 32 Ave of the Americas ● New Jersey, NJ: 100 Delawanna, Clifton Campus ● Phoenix, AZ: 120 East Van Buren St.